DEZHOU PRECION MACHINE TOOL,DEZHOU DELONG(GROUP) MACHINE TOOL,Deephole Honing Machine
  • HOME >PRODUCTS > Others
  • Others
  • B201XA Type of the products:B201XA
    This series of products are suitable for processing various kinds of inclined planes, T slot, guideway surfaces combined with a variety of planes. The machine can perform to plane, mill and grind under the auxiliary milling heads and grinding heads. It has a long service life for the wear-resistance measures taken on the guideway joints. The main lubrication center and the lubricating oil return tubes are all installed outside of the bed, ensuring the clearance of the oil and the convenience of maintaining the lubrication system. Moreover, this series of planers adds two pairs of lubrication points on long bed body, which guarantees well lubrication result between bed and guideway of worktable. This series of machines have the property of good rigidity, high accuracy, stable movement and easy operation etc which is widely used in various industries.

  • Introduction
    Parameters
    This series of products are suitable for processing various kinds of inclined planes, T slot, guideway surfaces combined with a variety of planes. The machine can perform to plane, mill and grind under the auxiliary milling heads and grinding heads. It has a long service life for the wear-resistance measures taken on the guideway joints. The main lubrication center and the lubricating oil return tubes are all installed outside of the bed, ensuring the clearance of the oil and the convenience of maintaining the lubrication system. Moreover, this series of planers adds two pairs of lubrication points on long bed body, which guarantees well lubrication result between bed and guideway of worktable. This series of machines have the property of good rigidity, high accuracy, stable movement and easy operation etc which is widely used in various industries.
    The machine is controlled by D.C motors driven with high speed devices, thus the operation is smooth and reliable.
        B2010A B2012A B2016A
    Max. planning dimension
    Length
    3m
    6m
    9m
    4m
    6m
    9m
    12m
    4m
    6m
    9m
    12m
    Width
    1000mm
    1250mm
    1600mm
    Heigth
    800mm
    1000mm
    1250mm
    Max. workpieces weight
    5t
    9t
    13.5t
    8t
    10.5t
    13.5t
    18t
    10t
    15t
    18t
    20t
    Electric system
    Power
    Three phase A.C 380V 50HZ AC 380V
    Main motor
    55-75kW
    Worktable
    Max. permitted tension of gear racks
    60KN
    80KN
    Travel speed
    4.5-45
    3.5-35
    4.5-45
    3.5-35
    4-40
    3.5-35
    9-90
    7-70
    9-90
    7-70
    8-80
    7-70
    Worktable dimension
    Length
    3m
    6m
    9m
    4m
    6m
    9m
    12m
    4m
    6m
    9m
    12m
    Width
    900mm
    1120mm
    1400mm
    Qty of the T-slote
    5
    5
    7
    Width of T slots
    28mm
    28mm
    28mm
    Space of T slots
    170mm
    210mm
    200mm
    Beam turret feedrate(mm)
    Horizontal
    0.2-20
    0.2-20
    0.2-20
    Vertical
    0.15-7.5
    0.15-7.5
    0.15-7.5
    Slide turret feedrate(mm)
    Vertical
    0.2-11.5
    0.2-11.5
    0.2-11.5
    Beam turret rapid travel speed
    Horizontal
    1.6m/min
    1.6m/min
    1.6m/min
    Vertical
    0.6m/min
    0.6m/min
    0.6m/min
    Rapid travel speed of side turret
    0.85m/min
    0.85m/min
    0.85m/min
    Max. section Dimension of planing toolbar
    60×60
    60×60
    60×60
    Beam raising and dropping speed
    0.57m/min
    0.57m/min
    0.57m/min
    Flow of lubrication oil pump(L/min)
    6
    10
    6
    10
    6
    10
    Overall dimension
    Length(m)
    6.9
    12.9
    18.9
    9
    13
    19
    25
    9
    13
    19
    25
    Width(mm)
    3730
    4000
    4500
    Height(mm)
    2780
    3000
    3650
    General weight
    23.5
    31.5
    40
    29
    34
    43
    51
    39
    45
    54
    72
    Remarks
    The special accessories, such as surrounded grinding heads, end grinding heads, milling equipments as well as high-lift tool post devices etc. for A series gantry planers can be provided on customers’ requirements.
    Home  |  About Us  |  News  |  Products  |  Guestbook  |  Contact Us
    Powered by PageAdmin CMS